The problem Townsend Brown encountered with his capacitor disks was he had no onboard high voltage source capable of producing the required high electrostatic charges necessary to redirect the ether flow to propel his craft. The solution to the onboard high electrostatic charge generator was solved by an inventor in England named John R. R. Searl.

The following is a commentary on the work of John Roy Robert Searl from John A. Thomas, Jr.'s book, Antigravity: The Dream Made Reality, The Story of John R. R. Searl, of Direct International Science Consortium (DISC), 13 Blackburn, Low Strand, Grahame Park Estate, London, NW95NG, England and published by John A. Thomas, Jr. at 373 Rock Beach Road, Rochester, New York, 14617-1316 (716) 467-2694, fax (716) 338-2663 for $23.00.

John R. R. Searl was born May 2, 1932 at the Downs, Newbury Road, Wantage, England. At 4 years of age, John's father abandoned his mother and children and from her inability to support the family, the government placed the children in foster homes where John was often mistreated. From age 4.5 to 10, John had 2 dreams twice a year from which he claims he developed his Law of the Squares -- the basis of the technology that he has developed producing free-energy electric generators and flying saucer-type craft. >From his revolutionary work on free-energy technology and devices, John R. R. Searl has been awarded an honorary degree as Professor of Mathematical Structures of Creation and Energy, he is listed in the International Registry of Who's Who in the World and he has had many years of study at schools and universities coupled with the practical experience in the design and construction of electric motors, generators, medicine, navigation, electronics and computers.

John's first Searl Effect Generator was assembled when he was 14. The most notable effect produced by the generator was that when it's circuit was overloaded, it would suddenly lose its gravity and become airborne. From what John has learned over the years from his SEG, he and his friends have built about 40 flying saucers operated by radio remote control. John also powered his home for 30 years with one of his SEG generators. After discovering that his SEG generators can become airborne, John and his friends gave it a body and it became a flying saucer craft. The first SEG generators John built would become airborne and would shoot off into space and were lost.

After he resolved the problem of flight control and after about 20 years of setbacks his present company (DISC) is now building a 129 meter diameter manned craft. All craft until this one were not manned. This manned craft will travel at 30,000 feet and fly at 10,000 miles an hour. A trip from New York to London would take 20 minutes, 5 minutes from London to Germany and 30 minutes to Australia or Japan. In 1968, they were within three months of having a completed manned craft in the space race to the moon, when his wife conspired with the electric utility company to have John thrown in jail and his work destroyed for supposedly "stealing" electricity for his home. At that time, a person could not produce his own electricity. His home was connected to the grid, but he wasn't using the power company's electricity. He had been powering his home with his SEG generator.

Because of the opposition to his revolutionary free-energy technology, John R. R. Searl has decided to make this technology available to the world in a series of books, The Law of the Squares. His company, DISC, is also working on getting the price of his SEG generators down so that the average homeowner can buy one. He estimates a price of a mass produced unit at $600 dollars. It will produce all the free electricity a homeowner can use. Besides generators, and flying saucer-type space craft, there are endless applications for this 21st Century technology.

The following is a description of the Searl Effect Generator and how it operates:

1. It is a magnetic motor, electric generator and gravity controller. It is silent, makes no noise and has no touching moving parts. As such it will never wear out. It's energy source is the ether of space interacting with the magnetic field of the magnetic parts and the electrostatic field generated by the moving parts. The Searl Effect is the prime mover. The SEARL EFFECT is the EFFECT of four forces acting in two sets of two forces, acting at right angles to each other.

2. It can consist of any number of a special design of magnetic rings, with a minimum of three -- one inside the other and all on the same plane. Each ring (and the rollers than orbit between the rings) consists of four layers that are hydraulically pressed together in an Argon atmosphere. The inner layer consists of a rare earth such as Neodymium which acts as a reservoir of electrons. The next layer out consists of nylon which restricts the flow of electrons between the inner layer and the outer layers so that there is an even flow of electrons within the ring. Without the nylon layer, the flow of electrons would be pulsated. The next layer consists of magnetisable metal such as nickle or iron. This is covered by a thin layer of metal that acts as an electrical conductor and passes the electrons from the rings to the rollers and other rings.

3. The magnetic rings are stationary.

4. Between each magnetic ring are magnetic rollers that rotate on their own axis as they rotate around the rings suspended in the space between the rings by their interacting magnetic fields. The magnetic fields of the inner rings reinforce the field in the outer rings to make the rollers in the outer rings move faster. The speed of the rollers is 2.5 times the speed of the next inner ring of rollers. The rollers maintain themselves at right angles to the rings. The magnetic rollers are 1/4 inch shorter at the ends than the rings to keep the rollers from jumping out of the space between the rings. Each magnetic roller consists of 8 segments that are stacked on top of each other and are held together only by their magnetic attraction.

5. The rings are magnetically imprinted on their outer side with a Sine wave with the south pole on the top and north pole on the bottom which gives an AC type field around the rings. The magnetic imprint placed on the rollers is at right angles to the imprint on the rings. The roller magnetic imprint is circular, such as the magnetic field that exists around a wire that is carrying electric DC current. The magnetic imprint on the rings interacts with the magnetic field of the rollers and produces a magnetic wave in which the rollers move. The rollers move faster when the imprint on the rings is at a greater angle than 90 degrees. A greater angle of the imprint is needed for flight rather than for home power generation.

6. The rollers on the outer ring may pass through coils and induce a current in the coils.

7. A circuit is connected with the positive lead to the inner ring and the negative leads to the outer coils. The current induced in the coils is alternating current.

8. A capacitor-type electrostatic field is produced as electrons are extracted from the inner ring leaving it positively charged and the outer coils negatively charged.

9. When a load is placed in the circuit, the SEG's temperature lowers.

10. As greater loads are placed in the circuit, the SEG's roller's will jump to higher speeds incrementally.

11. As greater loads are placed in the circuit, the SEG's electrostatic field expands continuously outward.

12. As the electrostatic field expands continuously outward, gyroscopic particles in the field are lost as they get farther and farther away from the rings and when they hit atmospheric or other atoms. At very high electrostatic charges, the gyroscopic particles in the field may even produce light on the top south polar area of the SEG's rings where gyroscopic particles are hitting air particles.

13. As the electrostatic field expands continuously, air, water and other approaching objects become electrostatically charged with the same charge and are repelled away. The SEG eventually is enveloped in a vacuum.

14. As gyroscopic particles in the continuously expanding field are lost, the SEG gets colder and colder. As atomic magnetic field layers are reduced by the loss of gyroscopic particles, at 4 degrees Kelvin, the atoms in the SEG suddenly all align and become superconductive. The overall magnetic field of the SEG then suddenly becomes super powerful because of the aligning of all the atoms. The magnified magnetic field combined with the electrostatic field redirects the ether flow and the SEG levitates.

15. As gyroscopic particles are lost in the continuously expanding electrostatic field, more particles are created in the nucleus of the SEG's atoms from the ether of space.

16. As gyroscopic particles are created in the nucleus of the SEG's atoms, a vacuum is produced in the nucleus of the SEG's atoms because the spinning gyroscopic particles take up less space than the ether they are made of.

17. The ether of space rushes in to fill the vacuum in the nucleus of the SEG's atoms exerting a gravitational pressure in the direction of their greatest flow.

18. Gyroscopic particles emitting from the south polar top side of the rings cause a lower ether pressure in the inflowing ether than at the north polar bottom of the SEG.

19. Gyroscopic particles entering the atoms of the SEG rings at the north polar bottom causes a greater ether flow/gravitational pressure. The greater ether pressure on the bottom of the SEG and less on the top causes it to levitate.

20. A shell is built around the SEG with a cabin in the center ring to give it a vehicle capability.

21. The placement of plungers in flight control cells on the periphery of the SEG craft gives directional control to the ether flow and the craft. When a plunger is activated, it momentarily touches the rotating outer rollers and the craft immediately tips down on that side similar to how a gyroscope tips when its rotating periphery is touched.

22. Increasing the load on the circuit of the SEG in the craft gives control to the proportionality of the ether flow to provide craft speed control. Electricity in an SEG used for electric power is taped with coils spaced around the outer ring and its rollers. The rollers passing through the U shaped coils induce an alternating electric current in the coils. For an SEG used for flight, instead of coils, the outer perimeter consists of wire brushes that slightly touch the orbiting rollers to extract electrostatic electricity which is then emited from the top and bottom surfaces of the craft. Directional flight control can also be obtained by redireting the emission of electrostatic ions to different sections of the craft hull.

23. A comfortable one-half G is a constant in the center ring/cabin area because the ether entering the SEG from above is 1/2 that entering from below.

24. The craft is inertia-free since the craft carries it's own ether along with it and controls it.

25. The SEG has an energizing effect on life forms, wounds heal faster, and a greater resistance to disease is produced by coming within its proximity because of the the abundantly emitted free electrons discharged by the generator into the surrounding medium.

26. The SEG's south polar top emitting gyroscopic particles energizes material and will put out fires because more energy is pumped into the burning mass than leaves it.

27. Electrons emitting from the SEG charge pollution particles in the air and the particles drop to the ground to clean the air. The electrons placed in the air by the SEG also energize life forms improving health and energy.

28. Innumerable applications of this technology could be developed including: flying cars by putting SEG's in the wheels, floating beds, cordless appliances, home power generation, space craft and space cities, cities under the ocean, Antarctica, the Sahara desert, levitating cranes, a pollution-free, free-energy planet. Its energy can be used to heal disease, and is especially effective in healing burn victims. It can used to clean the air of pollution. It can power water purifiers. It could be used to extinguish fires. Homes designed with SEG technology would be resistant to fire, earthquakes, tornados, hurricanes, and burglars. SEG craft could be used to disperse hurricanes and tornadoes and control the weather.

The Law of the Squares

The Searl Effect is what drives the Searl Effect Generator or Inverse-G disk and was developed from the Law of the Squares as discovered and developed by Prof. John R. R. Searl. A square is a series of sequentially unique numbers forming a square and is balanced when the horizontal, vertical and two diagonal line values all equal. Only whole numbers are used. Each number in the square represents the measure in grams of the compounds which are used to make the SEG. Starting with the highest number, this specifies the grams of a rare earth -- an element which has a greater number of electrons than other powders used. These go in the inner ring. Layers going out from the inner ring use atoms with less and less electrons. Elements are selected from the Periodic Table starting at the bottom of the Table with the inner ring and continuing up the table as layers in the rings are added from the center. Each ring consists of several layers. Layers are separated by a nylon layer to slow down the electron flow in the SEG. The Square of the SEG is selected by calculating the volume of the rings necessary to give room to the required number of rollers and then selecting a GROUP TWO (even numbered square) that will satisfy this volume.

The LAW OF NATURE states that no two bodies or particles can share the same SPACE FRAME within the same TIME FRAME, but that two bodies or particles CAN share the same space frame at different time frames. These two states must exist at all times; they cannot exist independent of each other. Within each square are TWO states, a Space Frame and a Time Frame. Each square = a space frame; each level = a time frame. The level of a square begins with the lowest number in the square. The SPACE FRAME (square value, or line value) on a series of different squares may be the same, but the TIME FRAME (level value) for each will be different. Conversely, the TIME FRAME (level value) on a series of different squares may be the same, but the SPACE FRAMES (square value, or line value) will be different -- this is the LAW OF NATURE and cannot be broken. If a Time Frame is set, the space gets smaller as you move down the squares.

The number of a square = the number of digits on one side of a square. There are three groups of squares. A GROUP ONE square (odd numbered squares) has a center point which is the line value divided by the number of the square. Group One numbers ROTATE. GROUP TWO and THREE squares (even numbered squares) have a center block of four numbers at the center of the square. Because group one squares do not have a center block, a group one square cannot be used in making a Searl Effect Generator. Only GROUP TWO squares can be used in making an SEG. It's center block is shared by the total square. Group Two squares OSCILLATE. Group Two squares are half of all even numbered squares -- those that can be divided by 4. A GROUP THREE cannot be used in making a SEG because it's center block of numbers acts as a point and is not shared by the whole square. Although the group three center appears like a group two center, it only belongs to the rotating cross of the center of the square. But there is a way through this problem by applying it to flight. Group Three squares are half of all even numbered squares -- those that cannot be divided by 4. A Group Three square OSCILLATES, except its center cross ROTATES.

When a value can be used in more than just one square, it gives much more choice in the design structure than just one square can offer. The SEG needs 8 squares to be in the offer, one of which must be the value of the square which you intend to use. The SEARL EFFECT is the EFFECT of four forces acting in two sets of two forces, acting at right angles to each other. The Searl Effect is a true prime mover and through its action can produce electricity or motive power.

In addition, the following about nature must be understood: There are TWO PRIME STATES in nature, ENERGY and MATTER and can be converted from one into the other. Nature is BINARY in its actions, Low/High, Yes/No, 0/1, Go/No Go, many of which are the mirror image of the other, such as, Left/Right, Day/Night, Male/Female, North/South, In/Out, Latitude/Longitude. Sometimes Nature makes a triangle agreement in its actions or functions, such as, One Input/Two Outputs, Two Inputs/One Output. There are THREE PRIME STATES in Nature: Gas, Liquid, and Solid. In SOLIDS we have Conductors, Semi-Conductors, Non-Conductors. The ELEMENTS are the building blocks of Nature and consist of Non-Metals, Light Metals and Heavy Metals. Materials are Brittle, Ductile and Elastic. Conditions to consider are Pressure, Temperature, and Vacuum. Forces are Electricity, Magnetism, and Gravity. Chemical states are Acid, Alkaline or Neutral. Temperature points are Melting Point, Boiling Point, and Superconductive Point. Other important items of nature are Density, Amphoteric, Crystaline Structure, Electron Configuration, Atomic Weight, Atomic Volume, Atomic Radii, Covalent Radius. Important questions to ask are 1) What material you are going to use? 2) How much material are you going to use? 3) What AC are you going to energize the material with? 4) How are you going to apply the DC?

When you make a circle engine, you must have no less than three rings and two states must be involved, 1) stationary -- plates, and 2) motion - the runners. The lowest value that can form a square of uniform nature is 12, and square 3 is the smallest square possible. So we need no less than 12 runners upon the first plate for smooth operation. Square 3, level 1 begins with 0 with a line value of 12. A square 4 is the smallest square that can be used to build an SEG. The size of the SEG is determined by the size of the Level used (how big of numbers in the square).

In the layout of numbers of a square, you can either have UNIFORM numbering in which the line values do not add up to the diagonals, or you can have RANDOM numbering in which the line values DO line up to the diagonals. The SEG uses random numbered squares in which the lines values, column values and diagonals all equal. Since random can switch to uniform and uniform to random, this is taken to mean that mass can switch to energy and energy can switch to mass. The center square for both random and uniform states remains the same. For group two, the two diagonals remain the same in both random and uniform states and form the line value. For FREE MOTION, there must be four forces acting, in which the horizontal force must always have the difference of 2 units and this is what groups 2 and 3 produce. In the center squares of group 2, the difference between the top and bottom will always be 2. One-half the difference between the left and right verticle of the center square is also the number of the square.

When designing an SEG, the volume of the plates for the size of machine wanted must be calculated. Prof. Searl then has a level chart that will give the number of the square needed for that volume. The frequency for the squares at this level is then determined by the number of magnetically imprinted poles placed on the rings. A heavier rare-earth elements from the lower part of the periodic table is used in the inner layer of each ring with lighter elements from higher in the periodic table in the outer layers of each ring. This makes the more abundant electrons in outer orbits of bigger atoms available for the circuit. The powders of the elements are mixed according to the numbers in each line of the square in grams for each layer with the heaviest (highest number) for the element in the inner layer of a ring and lighter (lower numbers) for element layers towards the outside layer. For example, for a square of 4, top row, the highest number would go to measure the grams of the inner layer. The next lower number to the next layer, the next lower number to the next layer, etc. The exception to this order is that the nylon layer takes the smallest number. The next row would be assigned to the next outer ring, etc. The rollers would be done similarly with the total mass of each segment being the line value with each layer of the roller taking the same assignment of values as a ring.

SQUARE 4

Level 2 (Level 1 is 0):

L1 L3 L2 L4 (highest to lowest for layers)

16 5 9 4 34 Ring 1 If the materials we are using are Neodymium, Nylon, Nickle and
2 11 7 14 34 Ring 2 Aluminum, then the grams for Ring 1 would be:
3 10 6 15 34 Ring 3 Neodymium 16 gms Inner layer
13 8 12 1 34 Ring 4 Nylon 4 gms
Nickle 9 gms
34 34 34 34 34 34 Aluminum 5 gms Outer layer

Level 201:

3200 1000 1800 800 6800
400 2200 1400 2800 6800
600 2000 1200 3000 6800
2600 1600 2400 200 6800

6800 6800 6800 6800 6800

Questions to seek answers for:

What is the volume for 1 gm of each element?

At what temperature and pressure are the rings and rollers pressed together at in an Argon atmosphere (to prevent combustion)?

-Словосочетание "можно проверить, купив лицензию" звучит несколько адиозно...

.Еще сильнее смущает, что за 30 лет эту лицензию, надо полагать, никто не купил...

.

Первый раз слышу, чтобы с помощью вектора Пойтинга можно было что-либо крутить или двигать. Вы, надеюсь не будете утверждать, что с помощью вектора магнитной индукции или вектора нормали к Земному шару можно летать на Луну?

тогда меня можно заинтересовать демонстрацией.

Он предлагает купить лицензию. Что в этих словах адиозного?

Вы знаете о его продажах?

Именно это возможно. Авторское понимание и его "закон квадратов" мне кажутся
сомнительными, но если его генератор работает, то все нормально.

-В том-то и дело, что кто-то продает, понимаешь, летающие тарелки на протяжении 30 лет, а я об этом ничего не знаю.

Что-то смахивает на дрынолет из "Кин-Дза-Дза"...

Он Вам должен докладывать?

Эта штука называется пепелац. Но без гравицапы она летает только около планеты.

Общение было полезным. Прошу более не беспокоиться.

-Нет, сливочная!

-Ааа... Сливочки наливаете?

-Нее... Фекалии сливаем...